ROQW103, JGS2, High Surface Quality Optical Quartz Wafer, Round Vis Quartz Plates, 0.2-5mm Thickness, 25-110mm Outer Diameter

  • Material: JGS2 Quartz, SiO2>99.9%
  • Temperature Resistance:<1100℃
  • Transmittance: 300-800nm, >90%
  • Including: 1pc/ea

$5.00$90.00

SKU: ROQW103 Categories: ,
Transmittance spectrum

Light Transmittance spectrum

Parameters of quartz glass

01
Density2.29g/cm³
Specific heat879J/KG•℃
Dispersion0.00806
Refractive index1.51
Abbe number67618
Thermal expansivity5.5×10Eˉ⁷/℃

Specifications

These items are made of JGS2, it has excellent light transmission performance at 300-800nm, and we have improved the surface quality of the all the quartz plates from 40-60nm to 20-40nm. 

ItemL/W < 50mm50mm < L/W < 100mmL/W > 100mm
Dimension Tolerance-0.05mm-0.05mm-0.1mm
Thickness Tolerance±0.05mm±0.05mm±0.1mm
Surface Quality20-40nm20-40nm20-40nm
Surface Parallelism<0.01mm<0.02mm<0.1mm
This precision applies to JGS2 quartz plates

Properties of Quartz Glass

Quartz glass has low coefficient of thermal expansion, high heat resistance, good chemical stability, excellent electrical insulation, low and stable ultrasonic delay performance, high light transmittance in UV-VIS-NIR spectrum performance, and has higher mechanical properties than ordinary glass.

Quartz glass is considered acid material, in addition to hydrofluoric acid and hot phosphoric acid, it is inert to any other acid, which determines is is a good acid-resistant material. At room temperature, the corrosion degree of alkali and salt to quartz glass is also small, so it is also possible to use quartz glass in these reagents.

Quartz glass has a high dielectric strength and low conductivity, even at high temperature, high pressure and high frequency, it can still maintain a high dielectric strength and electrical resistance, and there is almost no dielectric loss in the applied frequency band, because quartz glass is an excellent high temperature dielectric insulation material

The optical properties of quartz glass are unique, which can pass through the 185-3500nm, and it is the priority of all UV-transmitting materials. Because the outstanding physical properties of quartz glass, and the bubble, the streak, the uniformity, the birefringence can be comparable to the general optical glass, so it is an essential optical material for working in a variety of harsh occasions with high stability optical system.

 

Optical Glass Use Instructions

1. Quartz glass products are valuable materials and must be handled with great care when used

2. All kinds of glass have the highest use temperature, which should not be exceeded when used, otherwise it will crystallize, or soften and deform.

3. Quartz glass that needs to be used at high temperatures must be wiped clean before use. Can be soaked with 10% hydrofluoric acid or lotion. Then wash with high-purity water or alcohol. Wear fine thread gloves during operation. Do not touch the quartz glass directly with your hands

4. Allow continuous use of glass products at high temperatures, which is good for extending the life of glass and improving high-temperature resistance. On the contrary, the intermittent use of quartz glass products at high temperatures has a limited number of uses.

5. Although the use of glass material has strong thermal stability, it can withstand severe temperature differences, but in actual use, due to the residual strain and the shape of the product, the thermal stability has a certain difference. Be careful when using.

6. Quartz glass coefficient acidic materials, high-temperature use strictly avoid contact with alkaline substances (such as water glass, asbestos, potassium and sodium compounds, etc.), otherwise it will greatly reduce its crystallization resistance.

Weight N/A
Size

φ25mm×1mm, φ25mm×0.5mm, φ25mm×1.5mm, φ25mm×2mm, φ25mm×5mm, φ25.4mm×5mm, φ28mm×1.5mm, φ30mm×1mm, φ30mm×2mm, φ30mm×3mm, φ30mm×0.5mm, φ30mm×0.7mm, φ35mm×0.5mm, φ38mm×1.5mm, φ40mm×1mm, φ42mm×2mm, φ50mm×1mm, φ50mm×2mm, φ50mm×0.2mm, φ50mm×0.5mm, φ60mm×1mm, φ60mm×3mm, φ70mm×1mm, φ70mm×3mm, φ78mm×3mm, φ100mm×2mm, φ100mm×5mm, φ110mm×5mm

Reviews

There are no reviews yet.

Be the first to review “ROQW103, JGS2, High Surface Quality Optical Quartz Wafer, Round Vis Quartz Plates, 0.2-5mm Thickness, 25-110mm Outer Diameter”

glass optics

Optical Quartz/Glass Plates Custimized Service

In addition to the quartz/glass sheets sold on our website, we can also customize according to your requirements, our regular customization standards are as follows

ItemL/W < 50mm50mm < L/W < 100mmL/W > 100mm
Dimension Tolerance-0.05mm-0.05mm-0.05mm
Thickness Tolerance±0.05mm±0.05mm±0.05mm
Surface Quality20-40nm20-40nm20-40nm
Surface Parallelism<0.01mm<0.02mm<0.05mm
This precision applies to standard customized optical quartz plates

Higher Precision

If the above precision we commonly use does not meet your requirements, we can make the plates according to your drawing, and the highest precision we can made is Surface Quality- 10nm, Parallelism ¼λ.

customize service